spaceship/ui/IconButton.gd

@tool
class_name IconButton
extends Control

# Square neon-outlined button, hand-drawn to match the game's existing
# no-texture glowing look (same NeonDraw technique as ships/enemies) -
# no icon image assets, just a glyph drawn inside the frame.

signal pressed

# Scenes store `icon` as a plain int, so NEW ENTRIES MUST BE APPENDED.
# Inserting one anywhere but the end silently repoints every button after
# it, in every scene file that already names an icon by number. The entries
# below are therefore in the order they were added, not in any sensible one.
enum Icon {
	MAP, CLOSE, SHIP, DOWN_ARROW, UP_ARROW, BUILD, ROTATE_CW, ROTATE_CCW,
	# One per building, each a miniature of what actually gets placed. The
	# build menu used to pick from the generic set, which left the mothership
	# and the command centre sharing a folded-map glyph.
	MOTHERSHIP, CRAFTER, COMMAND_CENTER, EXTRACTOR, TRANSPORT_HUB, SHIP_LAB,
	# Two arrows passing each other. The single up/down arrows already mean
	# "load" and "store" one way each, and this is where both live.
	TRANSFER,
	# Ship-lab upgrades, drawn as the EFFECT rather than the building that
	# sells it, so a card full of them stays scannable.
	UPGRADE_DAMAGE, UPGRADE_RATE, UPGRADE_RANGE, UPGRADE_THRUSTERS,
	UPGRADE_SHIELD_HITS, UPGRADE_SHIELD_RECHARGE, UPGRADE_CARGO,
	UPGRADE_ENGINES, UPGRADE_UNLOCK_SHIELD,
	ACTION_MENU,
	GAS,
	LEFT_ARROW, RIGHT_ARROW,
	MINUS, PLUS,
	SHIELD_VESSEL,
	# The ship and the thing it drops - the same two-icon split as
	# LASER_VESSEL/LASER_SHOT below.
	GAS_BOMBER, GAS_BOMB,
	GAS_BURNER,
	# A wide hauler hull, distinct from every vessel glyph above.
	CARRIER_VESSEL,
	LASER_VESSEL, LASER_SHOT,
	# Drawn as an engine bell, not the warped ring the name suggests: this
	# was a "space-time distorder" before it became the Energy Propulser.
	# The name cannot follow the art without renumbering everything after it.
	DISTORDER_VESSEL,
	# Switching a converter off and on.
	PAUSE, RESUME,
	OUTPOST,
	PLANNING_CENTER,
	# The workshop and the drone it sends out.
	WORKSHOP, REPAIR_DRONE,
	# The standing objective.
	QUEST,
	# A fleet-wide thrust burst, distinct from the Propulser vessel icon.
	DASH,
	# Three sliders. Used only by the editor-only sandbox button.
	DEV_TOOLS,
	# A directional sensor dish.
	SCANNER,
}

# Size the glyphs were originally drawn against. Every glyph dimension is
# scaled by (actual size / this), so the button can be resized in the scene
# without the icon inside it staying small.
const REFERENCE_SIZE: float = 56.0

@export var icon: int = Icon.MAP
@export var glow_color: Color = Color(0.25, 0.85, 1.0)
# Selection is an additional frame, never a recolour. It lets menus retain
# semantic colours (vessel class, danger, cargo) while still making the
# active choice unmistakable.
# #112: the glyph without the button around it. The skill tree draws its own
# hexagon for each node and wants only what is inside one, and a second frame
# nested in that hexagon reads as a button sitting on a node rather than as
# the node's own mark.
@export var show_frame: bool = true
@export var highlighted: bool = false: set = set_highlighted
# Colour of the bright core stroke. Defaults to near-white, which reads well
# on the dark space background; scenes drawing over a bright backdrop (the
# lunar surface) override this with a dark colour so the button doesn't wash
# out. See NeonDraw.
@export var core_color: Color = Color(1.0, 1.0, 1.0)
# When false the button is drawn greyed out, but STILL emits `pressed` -
# the caller decides what to do, which is what lets an unavailable option
# explain itself instead of silently doing nothing.
@export var enabled: bool = true: set = set_enabled
@export var disabled_color: Color = Color(0.42, 0.45, 0.5)

var pressed_down: bool = false


func set_enabled(value: bool) -> void:
	if enabled == value:
		return
	enabled = value
	queue_redraw()


func set_highlighted(value: bool) -> void:
	if highlighted == value:
		return
	highlighted = value
	queue_redraw()


func _ready() -> void:
	queue_redraw()


func _blocked_by_modal() -> bool:
	# A panel is open and this button is not part of it, so it is sitting
	# BEHIND the panel and must not react.
	#
	# The panels cannot simply swallow GUI input with a mouse_filter of STOP:
	# the skill tree and the formation editor are driven from raw
	# _unhandled_input (see SkillTreeView), and a Control that consumes
	# touches through the GUI system swallows them before they ever get
	# there. So the panels stay transparent to input and the buttons check
	# instead.
	var own_modal: Node = _own_modal()
	for menu in get_tree().get_nodes_in_group("modal_menus"):
		# is_visible_in_tree(), NOT visible. Hiding a parent leaves the
		# child's own `visible` flag true, and the build menu's info popup is
		# itself a modal panel - so closing the build menu with the X left an
		# invisible popup still claiming to be open, and every button in the
		# game was blocked from then on. That is not a state a player can
		# get out of.
		if not menu.is_visible_in_tree():
			continue
		if menu.is_ancestor_of(self):
			continue
		# Stacking order matters, and used not to be considered at all. A
		# panel that this button's own panel is drawn ON TOP OF sits behind
		# it, not over it, so it must not swallow the input. The research
		# shortfall popup opens over the skill tree and the ship lab, and
		# without this every button in it - its close button included - was
		# dead, leaving the player no way out of the dialog.
		if own_modal != null and not _covers(menu, own_modal):
			continue
		return true
	return false


# The modal panel this button lives inside, or null for a HUD button that
# belongs to no panel (those stay blocked by any open panel, as before).
func _own_modal() -> Node:
	var node: Node = get_parent()
	while node != null:
		if node.is_in_group("modal_menus"):
			return node
		node = node.get_parent()
	return null


func _covers(other: Node, own: Node) -> bool:
	# Later siblings draw on top. Different parents means one of them is
	# nested inside something else - the build menu's info popup is a child
	# of the build menu - and there the conservative answer is "covered".
	if other.get_parent() != own.get_parent():
		return true
	return other.get_index() > own.get_index()


func _gui_input(event: InputEvent) -> void:
	# @tool runs this in the editor too, where a click on the canvas would
	# emit `pressed` at whatever it is wired to. The glyph is what we want
	# visible there, not the behaviour.
	if Engine.is_editor_hint():
		return
	if _blocked_by_modal():
		return
	if event is InputEventScreenTouch:
		_handle_press(event.pressed, event.position)
		accept_event()
	elif event is InputEventMouseButton and event.button_index == MOUSE_BUTTON_LEFT:
		_handle_press(event.pressed, event.position)
		accept_event()


# Complete the press immediately instead of waiting for a release.
#
# Measured on the device, in the web build: an on-screen probe reported
# `touch=1 mouse=1 held=y` after one tap - one touch down, one emulated mouse
# down, the button latched into its held state through ordinary GUI routing,
# and then nothing. The release is never delivered. A button that only emits
# on release therefore never emits at all.
#
# GUI routing itself works fine; `held=y` is the proof. An earlier attempt to
# bypass it made things worse and hid the evidence.
#
# The cost is the drag-off-to-cancel affordance below. Everywhere that
# delivers releases keeps it.
@export var fire_on_press: bool = OS.has_feature("web")

# Round rather than square. The in-world action controls - the abilities
# arranged around the fire stick, and the pivot pair - read as a different
# kind of thing from the square panel and menu buttons, and a round target is
# what a thumb reaching for an ability expects. Purely how the frame is drawn;
# the hit area is still the whole rect.
@export var round_frame: bool = false


# The frame outline, inset by `inset` pixels on every side. Round buttons trace
# a circle through the same inset box, so a round and a square button of the
# same size present the same footprint.
func _frame_points(inset: float) -> PackedVector2Array:
	if not round_frame:
		return PackedVector2Array([
			Vector2(inset, inset),
			Vector2(size.x - inset, inset),
			Vector2(size.x - inset, size.y - inset),
			Vector2(inset, size.y - inset),
		])
	var centre: Vector2 = size / 2.0
	var radius: Vector2 = centre - Vector2(inset, inset)
	var points: PackedVector2Array = PackedVector2Array()
	for i in range(32):
		var angle: float = TAU * float(i) / 32.0
		points.append(centre + Vector2(cos(angle) * radius.x, sin(angle) * radius.y))
	return points


func _handle_press(is_pressed: bool, at_position: Vector2) -> void:
	if is_pressed:
		pressed_down = true
		queue_redraw()
		if fire_on_press:
			# Not latched: nothing is coming to clear it.
			pressed_down = false
			pressed.emit()
	elif pressed_down:
		pressed_down = false
		queue_redraw()
		# Only counts as a real press if the finger/cursor is still over
		# the button when it lifts - dragging off before releasing (a
		# common way to "cancel" a touch) must not still trigger it.
		if Rect2(Vector2.ZERO, size).has_point(at_position):
			pressed.emit()


func _active_color() -> Color:
	return glow_color if enabled else disabled_color


func _draw() -> void:
	var rect_size: Vector2 = size
	var s: float = min(rect_size.x, rect_size.y) / REFERENCE_SIZE
	# Constant glow, brighter while held. Only the press state changes it,
	# so the button redraws on press/release instead of every frame.
	var pulse: float = 1.0 if pressed_down else 0.85

	var margin: float = 4.0 * s
	if show_frame:
		NeonDraw.draw_glowing_polygon(self, _frame_points(margin), _active_color(),
			pulse, core_color)
	if highlighted and show_frame:
		# The inset frame reads as a selection focus ring. It deliberately uses
		# the bright core rather than the button's glow colour, so selecting a
		# blue shield or pink transporter does not change what that colour means.
		NeonDraw.draw_glowing_polygon(self, _frame_points(10.0 * s), core_color, 1.0,
			core_color, 0.72 * s)

	var center: Vector2 = rect_size / 2.0
	match icon:
		Icon.CLOSE:
			_draw_close(center, pulse, s)
		Icon.SHIP:
			_draw_ship(center, pulse, s)
		Icon.MAP:
			_draw_map(center, pulse, s)
		Icon.DOWN_ARROW:
			_draw_arrow(center, pulse, 1.0, s)
		Icon.UP_ARROW:
			_draw_arrow(center, pulse, -1.0, s)
		Icon.BUILD:
			_draw_build(center, pulse, s)
		Icon.ROTATE_CW:
			_draw_rotate(center, pulse, s, 1.0)
		Icon.ROTATE_CCW:
			_draw_rotate(center, pulse, s, -1.0)
		Icon.MOTHERSHIP:
			_draw_mothership_icon(center, pulse, s)
		Icon.CRAFTER:
			_draw_crafter_icon(center, pulse, s)
		Icon.COMMAND_CENTER:
			_draw_command_icon(center, pulse, s)
		Icon.EXTRACTOR:
			_draw_extractor_icon(center, pulse, s)
		Icon.TRANSPORT_HUB:
			_draw_transport_hub_icon(center, pulse, s)
		Icon.SHIP_LAB:
			_draw_ship_lab_icon(center, pulse, s)
		Icon.TRANSFER:
			_draw_transfer_icon(center, pulse, s)
		Icon.UPGRADE_DAMAGE:
			_draw_upgrade_damage(center, pulse, s)
		Icon.UPGRADE_RATE:
			_draw_upgrade_rate(center, pulse, s)
		Icon.UPGRADE_RANGE:
			_draw_upgrade_range(center, pulse, s)
		Icon.UPGRADE_THRUSTERS:
			_draw_upgrade_thrusters(center, pulse, s)
		Icon.UPGRADE_SHIELD_HITS:
			_draw_upgrade_shield_hits(center, pulse, s)
		Icon.UPGRADE_SHIELD_RECHARGE:
			_draw_upgrade_shield_recharge(center, pulse, s)
		Icon.UPGRADE_CARGO:
			_draw_upgrade_cargo(center, pulse, s)
		Icon.UPGRADE_ENGINES:
			_draw_upgrade_engines(center, pulse, s)
		Icon.UPGRADE_UNLOCK_SHIELD:
			_draw_upgrade_unlock_shield(center, pulse, s)
		Icon.ACTION_MENU:
			_draw_action_menu(center, pulse, s)
		Icon.GAS:
			_draw_gas(center, pulse, s)
		Icon.LEFT_ARROW:
			_draw_horizontal_arrow(center, pulse, -1.0, s)
		Icon.RIGHT_ARROW:
			_draw_horizontal_arrow(center, pulse, 1.0, s)
		Icon.MINUS:
			_draw_minus(center, pulse, s)
		Icon.PLUS:
			_draw_plus(center, pulse, s)
		Icon.SHIELD_VESSEL:
			_draw_shield_vessel(center, pulse, s)
		Icon.GAS_BOMBER:
			_draw_gas_bomber(center, pulse, s)
		Icon.GAS_BOMB:
			_draw_gas_bomb(center, pulse, s)
		Icon.GAS_BURNER:
			_draw_gas_burner_icon(center, pulse, s)
		Icon.PAUSE:
			_draw_pause(center, pulse, s)
		Icon.RESUME:
			_draw_resume(center, pulse, s)
		Icon.CARRIER_VESSEL:
			_draw_carrier(center, pulse, s)
		Icon.LASER_VESSEL:
			_draw_laser_vessel(center, pulse, s)
		Icon.LASER_SHOT:
			_draw_laser_shot(center, pulse, s)
		Icon.DISTORDER_VESSEL:
			_draw_distorder_vessel(center, pulse, s)
		Icon.OUTPOST:
			_draw_outpost_icon(center, pulse, s)
		Icon.PLANNING_CENTER:
			_draw_planning_icon(center, pulse, s)
		Icon.WORKSHOP:
			_draw_workshop_icon(center, pulse, s)
		Icon.REPAIR_DRONE:
			_draw_repair_drone_icon(center, pulse, s)
		Icon.QUEST:
			_draw_quest_icon(center, pulse, s)
		Icon.DASH:
			_draw_dash_icon(center, pulse, s)
		Icon.DEV_TOOLS:
			_draw_dev_tools_icon(center, pulse, s)
		Icon.SCANNER:
			_draw_scanner_icon(center, pulse, s)


func _draw_scanner_icon(center: Vector2, pulse: float, s: float) -> void:
	# Dish, mast and three outward wavefronts: distinct from MAP (a folded
	# sheet) and RESEARCH (the mothership's archive).
	NeonDraw.draw_glowing_path(self, PackedVector2Array([
		center + Vector2(-12, -3) * s,
		center + Vector2(-5, 7) * s,
		center + Vector2(5, 4) * s,
	]), _active_color(), pulse, 0.6 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-4, 7) * s,
		center + Vector2(-4, 14) * s, _active_color(), pulse, 0.6 * s,
		core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-11, 14) * s,
		center + Vector2(3, 14) * s, _active_color(), pulse, 0.6 * s,
		core_color)
	for radius in [7.0, 13.0, 19.0]:
		draw_arc(center + Vector2(-7, 1) * s, radius * s, -1.1, -0.15, 10,
			_active_color(), maxf(1.0, 1.3 * s), true)


func _draw_dev_tools_icon(center: Vector2, pulse: float, s: float) -> void:
	# A compact bank of adjustment sliders. It reads as configuration rather
	# than as the old BUILD glyph, which made the wave shortcut look like a
	# second construction button.
	for row in range(3):
		var y: float = (-9.0 + float(row) * 9.0) * s
		var left: Vector2 = center + Vector2(-13.0 * s, y)
		var right: Vector2 = center + Vector2(13.0 * s, y)
		NeonDraw.draw_glowing_line(self, left, right, _active_color(), pulse,
			0.45 * s, core_color)
		var knob_x: float = [-5.0, 7.0, -1.0][row] * s
		NeonDraw.draw_glowing_circle(self, center + Vector2(knob_x, y),
			2.7 * s, _active_color(), pulse, core_color)


func _draw_dash_icon(center: Vector2, pulse: float, s: float) -> void:
	var tip: Vector2 = center + Vector2(12.0, 0.0) * s
	var tail: Vector2 = center + Vector2(-5.0, 0.0) * s
	NeonDraw.draw_glowing_line(self, tail, tip, _active_color(), pulse,
		0.7 * s, core_color)
	NeonDraw.draw_glowing_path(self, PackedVector2Array([
		tip + Vector2(-7.0, -7.0) * s, tip,
		tip + Vector2(-7.0, 7.0) * s,
	]), _active_color(), pulse, 0.7 * s, core_color)
	for y in [-7.0, 0.0, 7.0]:
		NeonDraw.draw_glowing_line(self,
			center + Vector2(-13.0, y) * s,
			center + Vector2(-7.0, y) * s,
			_active_color(), pulse * 0.7, 0.45 * s, core_color)


# #140: a checklist - a page with a tick against the top line. Reads as
# "what I have been asked to do" rather than as a map, a target or a flag,
# each of which this button sits next to.
func _draw_quest_icon(center: Vector2, pulse: float, s: float) -> void:
	var half: Vector2 = Vector2(9.0, 12.0) * s
	NeonDraw.draw_glowing_path(self, PackedVector2Array([
		center + Vector2(-half.x, -half.y), center + Vector2(half.x, -half.y),
		center + Vector2(half.x, half.y), center + Vector2(-half.x, half.y),
		center + Vector2(-half.x, -half.y),
	]), _active_color(), pulse, 0.5 * s, core_color)
	# The done line, ticked; the two below it still open.
	var tick: Vector2 = center + Vector2(-5.0, -5.0) * s
	NeonDraw.draw_glowing_path(self, PackedVector2Array([
		tick + Vector2(-1.5, 0.0) * s, tick + Vector2(0.5, 2.0) * s,
		tick + Vector2(3.5, -2.5) * s,
	]), _active_color(), pulse, 0.5 * s, core_color)
	for row in [1.0, 5.0]:
		NeonDraw.draw_glowing_line(self, center + Vector2(-5.5, row) * s,
			center + Vector2(5.5, row) * s, _active_color(), pulse * 0.75,
			0.4 * s, core_color)


func _draw_close(center: Vector2, pulse: float, s: float) -> void:
	var r: float = 10.0 * s
	NeonDraw.draw_glowing_line(self, center + Vector2(-r, -r), center + Vector2(r, r), _active_color(), pulse, 0.5 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-r, r), center + Vector2(r, -r), _active_color(), pulse, 0.5 * s, core_color)


func _draw_ship(center: Vector2, pulse: float, s: float) -> void:
	var nose: Vector2 = center + Vector2(0, -11) * s
	var left: Vector2 = center + Vector2(-7, 8) * s
	var right: Vector2 = center + Vector2(7, 8) * s
	var points: PackedVector2Array = PackedVector2Array([nose, left, right])
	NeonDraw.draw_glowing_polygon(self, points, _active_color(), pulse, core_color)


func _draw_shield_vessel(center: Vector2, pulse: float, s: float) -> void:
	var points: PackedVector2Array = PackedVector2Array()
	for i in range(6):
		var angle: float = -PI / 2.0 + float(i) * TAU / 6.0
		points.append(center + Vector2(cos(angle), sin(angle)) * 11.0 * s)
	NeonDraw.draw_glowing_polygon(self, points, _active_color(), pulse, core_color)


func _draw_carrier(center: Vector2, pulse: float, s: float) -> void:
	# Wide and flat-bottomed rather than pointed - reads as a hauler, not a
	# combat silhouette, matching the ship's own hull_points.
	var hull := PackedVector2Array([
		center + Vector2(-13, -4) * s,
		center + Vector2(-7, -8) * s,
		center + Vector2(7, -8) * s,
		center + Vector2(13, -4) * s,
		center + Vector2(13, 6) * s,
		center + Vector2(-13, 6) * s,
	])
	NeonDraw.draw_glowing_polygon(self, hull, _active_color(), pulse, core_color)


func _draw_distorder_vessel(center: Vector2, pulse: float, s: float) -> void:
	# #77: an engine bell with a thrust plume under it. The glyph used to be a
	# ring with a wobbling radius, which read as warped space - correct for a
	# "space-time distorder" and wrong for the Energy Propulser it now is.
	var hull: PackedVector2Array = PackedVector2Array([
		center + Vector2(0.0, -13.0) * s,
		center + Vector2(5.0, -4.0) * s,
		center + Vector2(7.0, 3.0) * s,
		center + Vector2(10.0, 10.0) * s,
		center + Vector2(-10.0, 10.0) * s,
		center + Vector2(-7.0, 3.0) * s,
		center + Vector2(-5.0, -4.0) * s,
	])
	NeonDraw.draw_glowing_polygon(self, hull, _active_color(), pulse, core_color)
	# Three exhaust strokes, the middle one longest, so the thrust reads as
	# coming OUT of the bell rather than as decoration beside it.
	for offset in [-5.0, 0.0, 5.0]:
		var length: float = 16.0 if is_zero_approx(offset) else 12.0
		NeonDraw.draw_glowing_line(self,
			center + Vector2(offset, 11.0) * s,
			center + Vector2(offset, length) * s,
			_active_color(), pulse * 0.8, 0.5, core_color)


func _draw_laser_vessel(center: Vector2, pulse: float, s: float) -> void:
	# A slim dart rather than the interceptor's plain triangle - the notch at
	# the nose reads as a fixed forward-facing emitter, not a hull point.
	var hull := PackedVector2Array([
		center + Vector2(0, -13) * s,
		center + Vector2(-8, 9) * s,
		center + Vector2(-3, 6) * s,
		center + Vector2(3, 6) * s,
		center + Vector2(8, 9) * s,
	])
	NeonDraw.draw_glowing_polygon(self, hull, _active_color(), pulse, core_color)


func _draw_laser_shot(center: Vector2, pulse: float, s: float) -> void:
	var from: Vector2 = center + Vector2(-9, 9) * s
	var to: Vector2 = center + Vector2(9, -9) * s
	NeonDraw.draw_glowing_line(self, from, to, _active_color(), pulse, 1.1, core_color)
	NeonDraw.draw_glowing_circle(self, to, 3.0 * s, _active_color(), pulse, core_color)


func _draw_gas_bomber(center: Vector2, pulse: float, s: float) -> void:
	var hull := PackedVector2Array([
		center + Vector2(0, -12) * s,
		center + Vector2(-12, 7) * s,
		center + Vector2(-5, 5) * s,
		center + Vector2(0, 11) * s,
		center + Vector2(5, 5) * s,
		center + Vector2(12, 7) * s,
	])
	NeonDraw.draw_glowing_polygon(self, hull, _active_color(), pulse, core_color)
	NeonDraw.draw_glowing_circle(self, center + Vector2(0, 2) * s, 4.0 * s,
		_active_color(), pulse, core_color)


func _draw_gas_bomb(center: Vector2, pulse: float, s: float) -> void:
	NeonDraw.draw_glowing_circle(self, center, 7.0 * s, _active_color(), pulse, core_color)
	for direction in [Vector2.UP, Vector2.DOWN, Vector2.LEFT, Vector2.RIGHT]:
		NeonDraw.draw_glowing_circle(self, center + direction * 9.0 * s, 3.5 * s,
			_active_color(), pulse * 0.85, core_color)


func _draw_gas_burner_icon(center: Vector2, pulse: float, s: float) -> void:
	# A hexagonal chamber with a hot core and vents, miniaturised from the
	# building's own silhouette (BuildingVisualBase._draw_gas_burner_static)
	# so the menu icon reads as the same structure being placed.
	var outer: PackedVector2Array = PackedVector2Array()
	var core: PackedVector2Array = PackedVector2Array()
	for i in range(6):
		var a: float = (float(i) / 6.0) * TAU + PI / 6.0
		outer.append(center + Vector2(cos(a), sin(a)) * 11.0 * s)
		core.append(center + Vector2(cos(a), sin(a)) * 5.5 * s)
	NeonDraw.draw_glowing_polygon(self, outer, _active_color(), pulse, core_color)
	NeonDraw.draw_glowing_polygon(self, core, _active_color(), pulse * 0.85, core_color)

	for i in range(4):
		var a: float = (float(i) / 4.0) * TAU + PI / 4.0
		var dir: Vector2 = Vector2(cos(a), sin(a))
		NeonDraw.draw_glowing_line(self, center + dir * 11.0 * s, center + dir * 15.5 * s,
			_active_color(), pulse, 0.35 * s, core_color)


func _draw_arrow(center: Vector2, pulse: float, direction: float, s: float) -> void:
	var r: float = 9.0 * s
	var tip: Vector2 = center + Vector2(0, r * direction)
	var shaft_top: Vector2 = center + Vector2(0, -r * direction)
	NeonDraw.draw_glowing_line(self, shaft_top, tip, _active_color(), pulse, 0.5 * s, core_color)
	NeonDraw.draw_glowing_line(self, tip, tip + Vector2(-r * 0.7, -r * 0.8 * direction), _active_color(), pulse, 0.5 * s, core_color)
	NeonDraw.draw_glowing_line(self, tip, tip + Vector2(r * 0.7, -r * 0.8 * direction), _active_color(), pulse, 0.5 * s, core_color)


func _draw_horizontal_arrow(center: Vector2, pulse: float, direction: float, s: float) -> void:
	var r: float = 10.0 * s
	var tip: Vector2 = center + Vector2(r * direction, 0.0)
	var tail: Vector2 = center + Vector2(-r * direction, 0.0)
	NeonDraw.draw_glowing_line(self, tail, tip, _active_color(), pulse, 0.5 * s, core_color)
	NeonDraw.draw_glowing_line(self, tip, tip + Vector2(-r * 0.8 * direction, -r * 0.7), _active_color(), pulse, 0.5 * s, core_color)
	NeonDraw.draw_glowing_line(self, tip, tip + Vector2(-r * 0.8 * direction, r * 0.7), _active_color(), pulse, 0.5 * s, core_color)


func _draw_pause(center: Vector2, pulse: float, s: float) -> void:
	# Two upright bars. Shown while something is RUNNING, because that is the
	# action the button performs, not the state it is in.
	for side in [-1.0, 1.0]:
		var x: float = 5.0 * side * s
		NeonDraw.draw_glowing_line(self, center + Vector2(x, -11.0 * s),
			center + Vector2(x, 11.0 * s), _active_color(), pulse, 0.9, core_color)


func _draw_resume(center: Vector2, pulse: float, s: float) -> void:
	# A play triangle, shown while something is stopped.
	var play: PackedVector2Array = PackedVector2Array([
		center + Vector2(-7.0, -11.0) * s,
		center + Vector2(11.0, 0.0) * s,
		center + Vector2(-7.0, 11.0) * s,
	])
	NeonDraw.draw_glowing_polygon(self, play, _active_color(), pulse, core_color)


func _draw_minus(center: Vector2, pulse: float, s: float) -> void:
	var r: float = 9.0 * s
	NeonDraw.draw_glowing_line(self, center + Vector2(-r, 0.0), center + Vector2(r, 0.0),
		_active_color(), pulse, 0.55 * s, core_color)


func _draw_plus(center: Vector2, pulse: float, s: float) -> void:
	_draw_minus(center, pulse, s)
	var r: float = 9.0 * s
	NeonDraw.draw_glowing_line(self, center + Vector2(0.0, -r), center + Vector2(0.0, r),
		_active_color(), pulse, 0.55 * s, core_color)


func _draw_transfer_icon(center: Vector2, pulse: float, s: float) -> void:
	# Two shafts side by side pointing opposite ways. Drawn as a pair rather
	# than as one double-headed arrow because the button's whole job is that
	# ore moves BOTH ways here, and a double-headed arrow reads as one thing
	# sliding back and forth.
	var r: float = 10.0 * s
	var gap: float = 7.0 * s
	for side in [-1.0, 1.0]:
		# Left shaft points up (into the fleet), right shaft points down.
		var direction: float = side
		var x: float = gap * side
		var tip: Vector2 = center + Vector2(x, r * direction)
		var tail: Vector2 = center + Vector2(x, -r * direction)
		NeonDraw.draw_glowing_line(self, tail, tip, _active_color(), pulse, 0.42 * s, core_color)
		var head: float = 5.0 * s
		NeonDraw.draw_glowing_line(self, tip, tip + Vector2(-head, -head * direction),
			_active_color(), pulse, 0.42 * s, core_color)
		NeonDraw.draw_glowing_line(self, tip, tip + Vector2(head, -head * direction),
			_active_color(), pulse, 0.42 * s, core_color)


# --- ship-lab upgrade glyphs ---------------------------------------------

func _draw_upgrade_damage(center: Vector2, pulse: float, s: float) -> void:
	# A heavy projectile striking a target.
	NeonDraw.draw_glowing_line(self, center + Vector2(-13, 0) * s, center + Vector2(5, 0) * s, _active_color(), pulse, 0.7 * s, core_color)
	for a in [0.0, PI * 0.5, PI, PI * 1.5]:
		var dir := Vector2(cos(a), sin(a))
		NeonDraw.draw_glowing_line(self, center + Vector2(8, 0) * s, center + Vector2(8, 0) * s + dir * 7.0 * s, _active_color(), pulse, 0.4 * s, core_color)


func _draw_upgrade_rate(center: Vector2, pulse: float, s: float) -> void:
	# Three successive shots: more fire per second.
	for x in [-9.0, 0.0, 9.0]:
		NeonDraw.draw_glowing_line(self, center + Vector2(x - 3, 7) * s, center + Vector2(x + 3, -7) * s, _active_color(), pulse, 0.55 * s, core_color)


func _draw_upgrade_range(center: Vector2, pulse: float, s: float) -> void:
	# Reticle with a long sight line.
	var r := 10.0 * s
	for i in range(12):
		var a := TAU * float(i) / 12.0
		var b := TAU * float(i + 1) / 12.0
		NeonDraw.draw_glowing_line(self, center + Vector2(cos(a), sin(a)) * r, center + Vector2(cos(b), sin(b)) * r, _active_color(), pulse, 0.32 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-15, 0) * s, center + Vector2(15, 0) * s, _active_color(), pulse, 0.38 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(0, -15) * s, center + Vector2(0, 15) * s, _active_color(), pulse, 0.38 * s, core_color)


func _draw_upgrade_thrusters(center: Vector2, pulse: float, s: float) -> void:
	# Ship nozzle with two exhaust flames.
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([center + Vector2(-10, -7) * s, center + Vector2(5, -7) * s, center + Vector2(11, 0) * s, center + Vector2(5, 7) * s, center + Vector2(-10, 7) * s]), _active_color(), pulse, core_color)
	for y in [-4.0, 4.0]:
		NeonDraw.draw_glowing_line(self, center + Vector2(-10, y) * s, center + Vector2(-17, y * 1.5) * s, _active_color(), pulse, 0.45 * s, core_color)


func _draw_upgrade_shield_hits(center: Vector2, pulse: float, s: float) -> void:
	# Layered hexagonal shield walls.
	for r in [8.0, 13.0]:
		var hex := PackedVector2Array()
		for i in range(6):
			var a := TAU * float(i) / 6.0 + PI / 6.0
			hex.append(center + Vector2(cos(a), sin(a)) * r * s)
		NeonDraw.draw_glowing_polygon(self, hex, _active_color(), pulse, core_color)


func _draw_upgrade_shield_recharge(center: Vector2, pulse: float, s: float) -> void:
	# A shield with a circular recovery arrow.
	var arc := PackedVector2Array()
	for i in range(10):
		var a := lerpf(-PI * 0.2, PI * 1.35, float(i) / 9.0)
		arc.append(center + Vector2(cos(a), sin(a)) * 11.0 * s)
	NeonDraw.draw_glowing_path(self, arc, _active_color(), pulse, 0.45 * s, core_color)
	var tip: Vector2 = arc[arc.size() - 1]
	NeonDraw.draw_glowing_line(self, tip, tip + Vector2(6, -1) * s, _active_color(), pulse, 0.45 * s, core_color)
	NeonDraw.draw_glowing_line(self, tip, tip + Vector2(1, 6) * s, _active_color(), pulse, 0.45 * s, core_color)


func _draw_upgrade_cargo(center: Vector2, pulse: float, s: float) -> void:
	# Freight crate, with outward arrows suggesting expanded volume.
	var box := 8.0 * s
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([center + Vector2(-box, -box) , center + Vector2(box, -box), center + Vector2(box, box), center + Vector2(-box, box)]), _active_color(), pulse, core_color)
	for side in [-1.0, 1.0]:
		NeonDraw.draw_glowing_line(self, center + Vector2(side * 10, 0) * s, center + Vector2(side * 16, 0) * s, _active_color(), pulse, 0.38 * s, core_color)


func _draw_upgrade_engines(center: Vector2, pulse: float, s: float) -> void:
	# Engine core with speed streaks.
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([center + Vector2(-4, -8) * s, center + Vector2(7, -5) * s, center + Vector2(10, 0) * s, center + Vector2(7, 5) * s, center + Vector2(-4, 8) * s, center + Vector2(-8, 0) * s]), _active_color(), pulse, core_color)
	for y in [-7.0, 0.0, 7.0]:
		NeonDraw.draw_glowing_line(self, center + Vector2(-18, y) * s, center + Vector2(-9, y) * s, _active_color(), pulse, 0.4 * s, core_color)


func _draw_upgrade_unlock_shield(center: Vector2, pulse: float, s: float) -> void:
	# A shield silhouette with a plus: unlock the whole vessel, not a stat.
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([center + Vector2(0, -13) * s, center + Vector2(11, -7) * s, center + Vector2(8, 7) * s, center + Vector2(0, 13) * s, center + Vector2(-8, 7) * s, center + Vector2(-11, -7) * s]), _active_color(), pulse, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-4, 0) * s, center + Vector2(4, 0) * s, _active_color(), pulse, 0.45 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(0, -4) * s, center + Vector2(0, 4) * s, _active_color(), pulse, 0.45 * s, core_color)


func _draw_action_menu(center: Vector2, pulse: float, s: float) -> void:
	# A small, intentionally neutral stack of choices. It marks a button that
	# opens context actions rather than carrying out one particular action.
	for y in [-8.0, 0.0, 8.0]:
		NeonDraw.draw_glowing_line(self, center + Vector2(-10, y) * s, center + Vector2(10, y) * s, _active_color(), pulse, 0.42 * s, core_color)
		NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
			center + Vector2(-15, y - 2) * s, center + Vector2(-11, y) * s,
			center + Vector2(-15, y + 2) * s,
		]), _active_color(), pulse, core_color)

func _draw_gas(center: Vector2, pulse: float, s: float) -> void:
	# Three drifting bubbles: the visual language for gaseous resources.
	for data in [[Vector2(-6,-3), 6.0], [Vector2(6,4), 8.0], [Vector2(4,-9), 4.0]]:
		var ring := PackedVector2Array()
		for i in range(10):
			var a := TAU * float(i) / 10.0
			ring.append(center + (data[0] + Vector2(cos(a), sin(a)) * data[1]) * s)
		NeonDraw.draw_glowing_polygon(self, ring, _active_color(), pulse, core_color)


func _draw_build(center: Vector2, pulse: float, s: float) -> void:
	# A plus inside a frame - "add a structure".
	var r: float = 11.0 * s
	var frame: PackedVector2Array = PackedVector2Array([
		center + Vector2(-r, -r), center + Vector2(r, -r),
		center + Vector2(r, r), center + Vector2(-r, r),
	])
	NeonDraw.draw_glowing_polygon(self, frame, _active_color(), pulse, core_color)
	var arm: float = r * 0.55
	NeonDraw.draw_glowing_line(self, center + Vector2(-arm, 0), center + Vector2(arm, 0), _active_color(), pulse, 0.4 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(0, -arm), center + Vector2(0, arm), _active_color(), pulse, 0.4 * s, core_color)


func _draw_rotate(center: Vector2, pulse: float, s: float, direction: float) -> void:
	# Three-quarter arc with an arrowhead on the leading end, mirrored for
	# the counter-clockwise variant.
	var r: float = 11.0 * s
	var segments: int = 14
	var sweep: float = TAU * 0.75
	var start: float = -PI * 0.5
	var arc: PackedVector2Array = PackedVector2Array()
	for i in range(segments + 1):
		var t: float = float(i) / segments
		var a: float = start + sweep * t * direction
		arc.append(center + Vector2(cos(a), sin(a)) * r)
	for i in range(segments):
		NeonDraw.draw_glowing_line(self, arc[i], arc[i + 1], _active_color(), pulse, 0.34 * s, core_color)

	var tip: Vector2 = arc[arc.size() - 1]
	var tangent: Vector2 = (tip - arc[arc.size() - 2]).normalized()
	var normal: Vector2 = Vector2(-tangent.y, tangent.x)
	var head: float = 5.0 * s
	NeonDraw.draw_glowing_line(self, tip, tip - tangent * head + normal * head, _active_color(), pulse, 0.34 * s, core_color)
	NeonDraw.draw_glowing_line(self, tip, tip - tangent * head - normal * head, _active_color(), pulse, 0.34 * s, core_color)


# --- building glyphs, each echoing the placed structure's silhouette ------

func _draw_mothership_icon(center: Vector2, pulse: float, s: float) -> void:
	# Radial flagship: a reactor core with six swept talons around it, the
	# same silhouette as the placed structure.
	for i in range(6):
		var base: float = (float(i) / 6.0) * TAU
		var talon: PackedVector2Array = PackedVector2Array()
		for step in [0.0, 0.5, 1.0]:
			var a: float = base + 0.72 * pow(step, 1.3)
			talon.append(center + Vector2(cos(a), sin(a)) * lerpf(7.0, 16.0, step) * s)
		for step in [1.0, 0.5, 0.0]:
			var a: float = base + 0.72 * pow(step, 1.3) - (0.34 * (1.0 - step) + 0.05)
			talon.append(center + Vector2(cos(a), sin(a)) * lerpf(7.0, 16.0, step) * s)
		NeonDraw.draw_glowing_polygon(self, talon, _active_color(), pulse, core_color)

	for radius in [6.5, 3.0]:
		var ring: PackedVector2Array = PackedVector2Array()
		for i in range(6):
			var a: float = (float(i) / 6.0) * TAU + PI / 6.0
			ring.append(center + Vector2(cos(a), sin(a)) * radius * s)
		NeonDraw.draw_glowing_polygon(self, ring, _active_color(), pulse, core_color)


func _draw_ship_lab_icon(center: Vector2, pulse: float, s: float) -> void:
	# A vessel inside brackets: something being examined, not built.
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
		center + Vector2(0, -9) * s, center + Vector2(5, 5) * s,
		center + Vector2(0, 2) * s, center + Vector2(-5, 5) * s,
	]), _active_color(), pulse, core_color)
	for sx in [-1.0, 1.0]:
		var x: float = sx * 11.0 * s
		NeonDraw.draw_glowing_line(self, center + Vector2(x, -11 * s), center + Vector2(x, 11 * s),
			_active_color(), pulse, 0.35 * s, core_color)
		NeonDraw.draw_glowing_line(self, center + Vector2(x, -11 * s), center + Vector2(x - sx * 4.0 * s, -11 * s),
			_active_color(), pulse, 0.35 * s, core_color)
		NeonDraw.draw_glowing_line(self, center + Vector2(x, 11 * s), center + Vector2(x - sx * 4.0 * s, 11 * s),
			_active_color(), pulse, 0.35 * s, core_color)


func _draw_workshop_icon(center: Vector2, pulse: float, s: float) -> void:
	# A wrench crossed with a girder. Nothing else in the set is a tool, and
	# the meaning wanted is "things are mended here" - the crafter's cradle
	# already owns "things are made here".
	var arm: float = 11.0 * s
	NeonDraw.draw_glowing_line(self, center + Vector2(-arm, arm),
		center + Vector2(arm * 0.5, -arm * 0.5), _active_color(), pulse, 0.5 * s, core_color)
	# The jaws.
	NeonDraw.draw_glowing_path(self, PackedVector2Array([
		center + Vector2(arm * 0.2, -arm * 0.95),
		center + Vector2(arm * 0.95, -arm * 0.8),
		center + Vector2(arm * 0.8, -arm * 0.1),
		center + Vector2(arm * 0.15, -arm * 0.3),
	]), _active_color(), pulse, 0.4 * s, core_color)
	# The girder it is working on.
	NeonDraw.draw_glowing_line(self, center + Vector2(-arm, -arm * 0.35),
		center + Vector2(arm * 0.1, arm), _active_color(), pulse * 0.7, 0.35 * s, core_color)


func _draw_repair_drone_icon(center: Vector2, pulse: float, s: float) -> void:
	# A small hull with a tool arm out in front, so it reads as a tender
	# rather than as another fighter.
	var r: float = 9.0 * s
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
		center + Vector2(0.0, -r), center + Vector2(r * 0.9, 0.0),
		center + Vector2(r * 0.6, r), center + Vector2(-r * 0.6, r),
		center + Vector2(-r * 0.9, 0.0),
	]), _active_color(), pulse, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(0.0, -r),
		center + Vector2(0.0, -r * 1.9), _active_color(), pulse, 0.35 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-r * 0.5, -r * 1.9),
		center + Vector2(r * 0.5, -r * 1.9), _active_color(), pulse, 0.35 * s, core_color)


func _draw_planning_icon(center: Vector2, pulse: float, s: float) -> void:
	# A tally board: a frame with three bars of different lengths inside it.
	# Nothing else in the set is rectilinear and horizontal, and the meaning
	# wanted is "how many of each", not "a place that builds things" - the
	# crafter's cradle already owns that.
	var w: float = 12.0 * s
	var h: float = 11.0 * s
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
		center + Vector2(-w, -h), center + Vector2(w, -h),
		center + Vector2(w, h), center + Vector2(-w, h),
	]), _active_color(), pulse, core_color)
	var lengths: Array = [0.82, 0.5, 0.66]
	for i in range(lengths.size()):
		var y: float = center.y + (float(i) - 1.0) * 6.0 * s
		var left: float = center.x - w + 3.0 * s
		NeonDraw.draw_glowing_line(self, Vector2(left, y),
			Vector2(left + (2.0 * w - 6.0 * s) * float(lengths[i]), y),
			_active_color(), pulse, 0.4 * s, core_color)


func _draw_outpost_icon(center: Vector2, pulse: float, s: float) -> void:
	# A watchtower with two vessels holding station off it. The hub's
	# octagon already means "things are stationed here and go out from
	# here"; this has to mean "things stay here and watch", so it is a
	# narrow mast with a sensor head rather than a ring, and the two darts
	# beside it are the garrison.
	var mast_top: Vector2 = center + Vector2(0.0, -11.0) * s
	var mast_foot: Vector2 = center + Vector2(0.0, 9.0) * s
	NeonDraw.draw_glowing_line(self, mast_foot, mast_top, _active_color(), pulse, 0.5 * s, core_color)
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
		mast_top + Vector2(0.0, -4.0) * s, mast_top + Vector2(4.0, 0.0) * s,
		mast_top + Vector2(0.0, 4.0) * s, mast_top + Vector2(-4.0, 0.0) * s,
	]), _active_color(), pulse, core_color)
	# Footing, so the mast stands on something rather than floating.
	NeonDraw.draw_glowing_line(self, mast_foot + Vector2(-6.0, 0.0) * s,
		mast_foot + Vector2(6.0, 0.0) * s, _active_color(), pulse, 0.4 * s, core_color)
	for side in [-1.0, 1.0]:
		var at: Vector2 = center + Vector2(11.0 * side, -1.0) * s
		NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
			at + Vector2(0.0, -4.0) * s, at + Vector2(2.6, 3.0) * s,
			at + Vector2(-2.6, 3.0) * s,
		]), _active_color(), pulse, core_color)


func _draw_transport_hub_icon(center: Vector2, pulse: float, s: float) -> void:
	# A ring of docking cradles with a freight box in the middle: reads as
	# "things are stationed here and go out from here", which is what the hub
	# does, and shares no silhouette with the crafter's open cradle.
	var ring_r: float = 11.0 * s
	var ring: PackedVector2Array = PackedVector2Array()
	for i in range(8):
		var a: float = (float(i) / 8.0) * TAU + PI / 8.0
		ring.append(center + Vector2(cos(a), sin(a)) * ring_r)
	NeonDraw.draw_glowing_polygon(self, ring, _active_color(), pulse, core_color)

	var box: float = 4.2 * s
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
		center + Vector2(-box, -box), center + Vector2(box, -box),
		center + Vector2(box, box), center + Vector2(-box, box),
	]), _active_color(), pulse, core_color)

	# Three stubby berths, so the ring reads as occupied rather than as a
	# plain octagon.
	for i in range(3):
		var a: float = (float(i) / 3.0) * TAU - PI / 2.0
		var dir: Vector2 = Vector2(cos(a), sin(a))
		NeonDraw.draw_glowing_line(self, center + dir * (box * 1.5),
			center + dir * (ring_r - 1.5 * s), _active_color(), pulse, 0.35 * s, core_color)


func _draw_crafter_icon(center: Vector2, pulse: float, s: float) -> void:
	# Reactor core, truss spine, and an open cradle holding a hull.
	var core_centre: Vector2 = center + Vector2(-11, 0) * s
	var core: PackedVector2Array = PackedVector2Array()
	for i in range(6):
		var a: float = (float(i) / 6.0) * TAU + PI / 6.0
		core.append(core_centre + Vector2(cos(a), sin(a)) * 5.0 * s)
	NeonDraw.draw_glowing_polygon(self, core, _active_color(), pulse, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-6, 0) * s,
		center + Vector2(-2, 0) * s, _active_color(), pulse, 0.35 * s, core_color)

	var bay: Vector2 = center + Vector2(6, 0) * s
	var cradle: PackedVector2Array = PackedVector2Array()
	for i in range(13):
		var a: float = lerpf(-0.25 * PI, 1.25 * PI, float(i) / 12.0)
		cradle.append(bay + Vector2(cos(a), sin(a)) * 10.0 * s)
	NeonDraw.draw_glowing_path(self, cradle, _active_color(), pulse, 0.4 * s, core_color)
	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
		bay + Vector2(0, -6) * s, bay + Vector2(-5, 4) * s, bay + Vector2(5, 4) * s,
	]), _active_color(), pulse, core_color)


func _draw_command_icon(center: Vector2, pulse: float, s: float) -> void:
	# Hex plotting rim with spokes to a diamond hub, echoing the placed
	# structure's silhouette: half the ports carry a formation token.
	var hex_r: float = 11.0 * s
	var hub_r: float = 4.0 * s
	var hex: PackedVector2Array = PackedVector2Array()
	for i in range(6):
		var a: float = (float(i) / 6.0) * TAU + PI / 6.0
		hex.append(center + Vector2(cos(a), sin(a)) * hex_r)
	NeonDraw.draw_glowing_polygon(self, hex, _active_color(), pulse, core_color)

	for i in range(6):
		var a: float = (float(i) / 6.0) * TAU + PI / 6.0
		var dir: Vector2 = Vector2(cos(a), sin(a))
		NeonDraw.draw_glowing_line(self, center + dir * hub_r, center + dir * hex_r, _active_color(), pulse, 0.32 * s, core_color)
		if i % 2 == 0:
			var tip: Vector2 = center + dir * hex_r
			var t: float = 2.6 * s
			NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
				tip + Vector2(0, -t), tip + Vector2(t, 0), tip + Vector2(0, t), tip + Vector2(-t, 0),
			]), _active_color(), pulse, core_color)

	NeonDraw.draw_glowing_polygon(self, PackedVector2Array([
		center + Vector2(0, -hub_r), center + Vector2(hub_r, 0),
		center + Vector2(0, hub_r), center + Vector2(-hub_r, 0),
	]), _active_color(), pulse, core_color)


func _draw_extractor_icon(center: Vector2, pulse: float, s: float) -> void:
	# A derrick standing on a planet's limb, with ore lifting off it - the
	# one building that only works over a planet, so the planet is the point.
	var limb: PackedVector2Array = PackedVector2Array()
	for i in range(11):
		var a: float = lerpf(-0.82 * PI, -0.18 * PI, float(i) / 10.0)
		limb.append(center + (Vector2(0, 22) + Vector2(cos(a), sin(a)) * 17.0) * s)
	NeonDraw.draw_glowing_path(self, limb, _active_color(), pulse, 0.45 * s, core_color)

	NeonDraw.draw_glowing_line(self, center + Vector2(-6, 5) * s, center + Vector2(0, -9) * s, _active_color(), pulse, 0.4 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(6, 5) * s, center + Vector2(0, -9) * s, _active_color(), pulse, 0.4 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-3.5, -1) * s, center + Vector2(3.5, -1) * s, _active_color(), pulse, 0.35 * s, core_color)
	# Shaft driven down through the limb - without it the derrick reads as a
	# tower standing on a hill rather than as something mining the planet.
	NeonDraw.draw_glowing_line(self, center + Vector2(0, -1) * s, center + Vector2(0, 14) * s, _active_color(), pulse, 0.3 * s, core_color)

	var ore_centre: Vector2 = center + Vector2(0, -15) * s
	var ore: PackedVector2Array = PackedVector2Array()
	for i in range(6):
		var a: float = (float(i) / 6.0) * TAU + PI / 6.0
		ore.append(ore_centre + Vector2(cos(a), sin(a)) * 4.0 * s)
	NeonDraw.draw_glowing_polygon(self, ore, _active_color(), pulse, core_color)


func _draw_map(center: Vector2, pulse: float, s: float) -> void:
	var w: float = 11.0 * s
	var h: float = 9.0 * s
	var outline: PackedVector2Array = PackedVector2Array([
		center + Vector2(-w, -h), center + Vector2(w, -h * 0.7),
		center + Vector2(w, h), center + Vector2(-w, h * 0.7),
	])
	NeonDraw.draw_glowing_polygon(self, outline, _active_color(), pulse, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(-w * 0.34, -h * 0.9), center + Vector2(-w * 0.34, h * 0.77), _active_color(), pulse, 0.4 * s, core_color)
	NeonDraw.draw_glowing_line(self, center + Vector2(w * 0.34, -h * 0.77), center + Vector2(w * 0.34, h * 0.9), _active_color(), pulse, 0.4 * s, core_color)