spaceship/tests/test_capture_points.gd

extends SceneTree

# Headless gameplay test: run with
#   godot --headless -s res://tests/test_capture_points.gd
# Verifies:
#   1. PlanetSetupHost restores an already-captured point immediately on
#      (re-)composition, instead of restarting its fill
#   2. a ship parked in range with no enemies nearby fills a point to
#      CAPTURED in about capture_time seconds, and GameState reflects it
#      (captured_point_count, is_planet_conquered - which is what
#      BuildController's extractor gate reads, see test_planet_conquest_gate)
#   3. an enemy within enemy_clear_radius blocks further progress
#      (state == BLOCKED) without erasing what was already filled
#   4. moving out of range drains progress gradually, not instantly, and
#      never below what a completed point already holds

# Resolved via load() inside _initialize(), NOT a top-level `const ...
# preload(...)`. A top-level preload in a script-mode ENTRY point (-s
# this_file.gd) evaluates during this file's own early compilation, which
# can happen before autoloads are registered - and CapturePoint.gd
# references GameState in a function body, which GDScript resolves at
# compile time. preload()ing it from inside _initialize() defers that
# until after the engine has finished booting, same as every plain load()
# call elsewhere in this file.
var CAPTURE_POINT_SCRIPT: Script
var PLANET_SETUP_SCRIPT: Script

var game_state: Node
var main: Node
var fleet: Node
var point: Node
var enemy: Node
var planet_id: String = "test_capture_planet"
var stage: int = 0
var elapsed: float = 0.0
var progress_before_block: float = 0.0
var progress_before_drain: float = 0.0


func _initialize() -> void:
	CAPTURE_POINT_SCRIPT = load("res://surface/CapturePoint.gd")
	PLANET_SETUP_SCRIPT = load("res://surface/PlanetSetup.gd")
	game_state = root.get_node("GameState")
	game_state.planet_capture.clear()

	# --- 1. restoration: an already-captured point stays captured -----
	var restore_planet_id: String = "test_capture_restore_planet"
	var fake_setup: Resource = PLANET_SETUP_SCRIPT.new()
	fake_setup.setup_id = "test_restore"
	fake_setup.surface_profile_id = "rocky"
	fake_setup.capture_points = PackedVector2Array([Vector2(0, 0), Vector2(500, 0)])

	game_state.planet_id = restore_planet_id
	var host1: Node = load("res://surface/PlanetSetupHost.tscn").instantiate()
	host1.apply_setup(fake_setup)
	game_state.mark_point_captured(restore_planet_id, 0)   # simulates a completed prior visit

	var host2: Node = load("res://surface/PlanetSetupHost.tscn").instantiate()
	host2.apply_setup(fake_setup)
	var restored: Node = null
	var fresh: Node = null
	for child in host2.get_children():
		if child.get_script() == CAPTURE_POINT_SCRIPT and child.point_index == 0:
			restored = child
		elif child.get_script() == CAPTURE_POINT_SCRIPT and child.point_index == 1:
			fresh = child
	if restored == null or restored.state != CAPTURE_POINT_SCRIPT.State.CAPTURED or restored.progress < 0.999:
		return _fail("re-landing did not restore an already-captured point")
	if fresh == null or fresh.state == CAPTURE_POINT_SCRIPT.State.CAPTURED:
		return _fail("an uncaptured point came back already CAPTURED")

	# --- 2-4. capture mechanics, in a live scene with a real fleet -----
	game_state.planet_capture.clear()
	game_state.planet_id = planet_id
	game_state.register_capture_points(planet_id, 1)
	game_state.buildings.clear()
	game_state.extractors.clear()
	game_state.rocks = 200

	main = load("res://world/Main.tscn").instantiate()
	root.add_child(main)
	fleet = main.get_node("Fleet")


func _process(delta: float) -> bool:
	elapsed += delta
	match stage:
		0:
			if elapsed < 0.1:
				return false
			main.get_node("EnemySpawner").set_process(false)
			main.get_node("AsteroidField").set_process(false)
			for a in get_nodes_in_group("asteroids"):
				a.queue_free()

			point = load("res://surface/CapturePoint.tscn").instantiate()
			point.point_index = 0
			point.capture_time = 1.0
			point.capture_radius = 200.0
			point.enemy_clear_radius = 300.0
			point.drain_rate = 0.5
			point.position = Vector2(4000, 0)   # well clear of spawn-time activity
			main.add_child(point)

			var far_away: Vector2 = point.position + Vector2(2500, 0)
			for ship in fleet.ships:
				ship.position = far_away
			fleet.move_to(far_away)
			elapsed = 0.0
			stage = 1
			return false
		1:
			# Out of range: no progress at all.
			if elapsed < 0.3:
				return false
			if point.progress > 0.001 or point.state != CAPTURE_POINT_SCRIPT.State.NEUTRAL:
				return _fail("progress rose while no ship was in capture_radius")

			for ship in fleet.ships:
				ship.position = point.position
			fleet.move_to(point.position)
			elapsed = 0.0
			stage = 2
			return false
		2:
			# Partway through capture_time: rising, not yet complete.
			if elapsed < point.capture_time * 0.4:
				return false
			if point.state != CAPTURE_POINT_SCRIPT.State.CAPTURING or point.progress <= 0.05:
				return _fail("point did not start filling with a ship in range (state=%d progress=%.2f)" % [
					point.state, point.progress
				])

			# An enemy shows up within enemy_clear_radius: must block further
			# fill without erasing what's already there. A bare "enemies"
			# group member (not a real Enemy.tscn) is deliberate: CapturePoint
			# only cares that something is in the group and in range, and
			# this avoids a real chaser/weapon exchange destroying the fleet
			# ships this test also needs alive in later stages.
			enemy = Node2D.new()
			enemy.add_to_group("enemies")
			enemy.position = point.position + Vector2(50, 0)
			main.add_child(enemy)
			progress_before_block = point.progress
			elapsed = 0.0
			stage = 3
			return false
		3:
			if elapsed < 0.5:
				return false
			if point.state != CAPTURE_POINT_SCRIPT.State.BLOCKED:
				return _fail("point did not report BLOCKED with an enemy nearby (state=%d)" % point.state)
			if point.progress > progress_before_block + 0.01:
				return _fail("progress rose while an enemy was inside enemy_clear_radius")

			# Enemy leaves and the ship backs off out of range: progress
			# should drain, but gradually - not snap to zero.
			enemy.queue_free()
			var far_away: Vector2 = point.position + Vector2(2500, 0)
			for ship in fleet.ships:
				ship.position = far_away
			fleet.move_to(far_away)
			progress_before_drain = point.progress
			elapsed = 0.0
			stage = 4
			return false
		4:
			if elapsed < 0.3:
				return false
			if point.progress >= progress_before_drain - 0.001:
				return _fail("progress did not drain while out of range")
			if point.progress <= 0.001:
				return _fail("progress dropped to zero instantly instead of draining gradually")
			if point.state != CAPTURE_POINT_SCRIPT.State.NEUTRAL:
				return _fail("point state did not return to NEUTRAL while draining out of range")

			# Move back in and let it finish this time.
			for ship in fleet.ships:
				ship.position = point.position
			fleet.move_to(point.position)
			elapsed = 0.0
			stage = 5
			return false
		5:
			# Draining first means completion now takes longer than a bare
			# capture_time - give it a generous margin.
			if elapsed < point.capture_time * 2.0 + 0.5:
				return false
			if point.state != CAPTURE_POINT_SCRIPT.State.CAPTURED:
				return _fail("point never reached CAPTURED (state=%d progress=%.2f after %.2fs)" % [
					point.state, point.progress, elapsed
				])
			if game_state.captured_point_count(planet_id) != 1:
				return _fail("GameState.captured_point_count did not record the capture")
			# is_planet_conquered is exactly what BuildController's extractor
			# gate reads (see test_planet_conquest_gate.gd) - not re-tested
			# through the build UI here to avoid duplicating that coverage.
			if not game_state.is_planet_conquered(planet_id):
				return _fail("single-point planet was not marked conquered")
			if point.z_index >= 0:
				return _fail("capture point does not draw behind the fleet/enemies (z_index=%d)" % point.z_index)

			print("TEST_CAPTURE_POINTS: PASS")
			quit(0)
			return true
	return false


func _fail(message: String) -> bool:
	print("TEST_CAPTURE_POINTS: FAIL (%s)" % message)
	quit(1)
	return true